Create Clamp For Wire Rope | Clamp For Wire Rope Company

The primary function of wire rope clamps is to secure the ends of wire ropes. They work by clamping onto the rope and providing a strong and secure connection. Wire rope clamps can be used to create loops or thimbles in the rope, allowing it to be attached to other hardware such as hooks or shackles.

Unfortunately, it is not uncommon to see a wire rope clip applied incorrectly. Some of the most common mistakes include:
1、Not torquing to the manufacturer’s expectations
2、Not using the recommended number of clips
3、Incorrect spacing between clips
4、Saddle is on the incorrect end of the rope
5、Incorrect amount of turnback when forming an eye
6、Using the wrong type of clip for the application
7、Not matching the clip size to the wire rope size
8、Failing to cycle the rope and regularly tighten the clips

Wire rope clamps, also known as wire rope clips or cable clamps, are used to secure the ends of wire ropes. One of the main benefits of wire rope clamps is their ability to provide a strong and secure connection without the need for specialized tools or equipment.

First, wrap the wire rope around the thimble or to form the eye, and turn back the correct amount of rope—as specified by the manufacturer.

Apply the first wire rope clip at the end of the dead end, with one base width of space. Use a torque wrench to tighten the nuts on the wire rope clip.

When applying the second clip (if required), place it as close to the eye loop or thimble as possible. Again, be sure to properly tighten the nuts of the clip with a torque wrench.

If more than two clips are required, the clips should be evenly spaced between the two that were placed first.